This item is usually dispatched same day
Nedo Germany has set a new standard in laser detectors with the Acceptor Maxx. SuperCell technology improves every aspect of the way you pick-up your laser and check your elevations. Accuracy, toughness, and reception height have all been redefined - at an affordable price. It is a must have for anyone who needs to know where their elevation is - quickly.
Select from four accuracy settings to suit your job site tolerances, then . The Acceptor Maxx will not only show you high, low, and on-grade - but how far from on-grade in millimetres.
Easy to use, just turn it on and go. Basic functions are a single press away. Set your accuracy and volume levels, and get to work. It will remember your last settings, even after changing the batteries.
Huge vertical reception range lets you find the beam quickly, even at long distances. No more missing the beam and searching high and low for a laser strike. Checking elevation without moving the clamp on the rod will turbocharge your grade checking.
The super-bright red, amber and green LED's mounted on either side of the LCD display allow users beside the receiver to also see when a grade is achieved, further speeding up the job site. In an industry first, the clamp is recessed in the back of the receiver, creating a flat rear surface. So you can now move from rod/staff straight to holding the receiver against a wall without removing the clamp. The clamp is also the most rugged in the industry, built to last! Totally weatherproof and designed to stand up to the toughest construction environments. Works with almost all infrared and red beam rotating lasers. Use everywhere you currently use your laser.
Not only will you be able to tell if you are high, low, or on-grade - you will be able to tell by EXACTLY HOW MUCH. Know how hard to hit the stake. Know how far to move the form. Get a quick estimate of how much material to bring in or take out - that is the difference with the new Acceptor Maxx!FEATURES:
- Gives distance in mm to level
- Level bubble
- Flush mounted clamp design
- Bright LED indicators, visible at more than 180 degrees
- Rugged clamp design
- Auto shut-off
- Comes with clamp
Minimum laser rotation speed required: 300rpm
Laser Detection Height: 124 mm
Working Radius: 1 m - 900m (Laser dependent)
Suits: Red beam rotating lasers 610-780nm
Power Supply: 2 x 1.5 Volt "AA" batteries
Battery Life: 120+ hours
Automatic Shut Off: After 15 minute measuring and operating break
Environmental: Waterproof, Dustproof to IP67
Dimensions without clamp: 170 x 88 x 32 mm
Operating Temp: -20°C to +50°C
Storage Temp: -30°C to +70°C
Weight with clamp and batteries: 685g
Clamp fixing thread: M6 on the rear
Warranty: 12 months