Skip to content

Protimeter SurveyMaster Moisture Meter

Stock Code: BLD5365
Original price $1,050.00 - Original price $1,050.00
Original price
$1,050.00 Excl. GST
$1,050.00 Excl. GST
Current price $1,050.00 Excl. GST

▼ Download Brochure

This item is usually dispatched same day

The Protimeter BLD5365 Dual-Function, versatile pin and non-invasive Moisture Meter is ergonomically designed for easy, one-handed operation to measure moisture in buildings and other related structures both on and below the surface. The Protimeter BLD5365 Surveymaster can help building professionals—such as contractors, surveyors, home builders and architects; Assess building moisture levels during new build and refurbishing activities.

Excessive moisture in buildings can lead to decay and deterioration of components and decorative finishes. Professionals involved with the identification, management and remedy of moisture need tools that help them to: Identify the extent of the moisture penetration, diagnose the cause of the problem, and monitor change in the moisture level

The reliable Protimeter BLD5365 moisture meter has two modes of operation—search and measure. These functions can help the user to distinguish sub-surface from surface moisture, essential information when trying to establish the extent and cause of a dampness problem.

The search mode is used to assess the moisture level beneath the surface of solid walls and floors independently of surface conditions. The nominal depth of the measurement is 3/4 inch (19 mm); this depends on the density and other characteristics of the material being measured. When held against the surface, as shown below, the Protimeter BLD5365 transmits a signal into the material. The relative moisture level is shown on the digital display and its moisture condition is shown on the accompanying scale of colour-coded lights.


  • Moisture Meter
  • Instructions
  • Remote head
  • Deep Wall Probes
  • Cap
  • Calibration Tester
  • 2 Replacement Pins
  • Carry pouch
  • Rugged construction
  • Easy-to-use
  • Large backlit display
  • Allows rapid assessment of building moisture
  • Pin moisture measurement
  • Instant readings in a wide range of building materials
  • Non-invasive measurement up to 20mm below the surface
  • Non-invasive measurement not adversely affected by surface moisture
  • Wide range of accessory plugins
  • Two meters in one
  • Applications: Shower pans, behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, joists, around toilets, drywall, below grade floors and walls, plaster, masonry, concrete and concrete block.
  • Weight: 100g
  • Display 1: Digital LCD
  • Display 2: 60 LEDs green (dry), yellow (at risk) and red (wet)
  • Measurement Range: Non-invasive (RF) 70 to 999 (relative) / Dry (green) — 70-169 / At Risk (yellow) —170 - 199 / Wet (red) — 200-999
  • Power: 1 x 9v Battery (supplied)
  • Warranty: 24 months on mechanical or manufacturing defects

Customer Reviews

Based on 1 review
T. Martin
The Best Meter For The Money!!!

I am a home inspector and use this meter daily. This is the best meter I have ever owner. It is very easy to use and very accurate. If your in the market for a moisture meter. Then this is the one!!!!!!!